|
Fibromax
Non-structural MDF board for industrial processing and interior applications
• MDF
• CE norm: MDF
• Dry conditions – service class 1
• Formaldehyde class: Standard
• Density: High
High density MDF board (MDF according EN 622-5) with a hard, fine and smoothly sanded surface. Fibromax can be used for non-loading bearing applications in dry conditions. This board has low formaldehyde emission (E1 class). Fibromax is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management.
Applications
• Interior and furniture
Available fire reaction classes
• D-s2-d0
• E
Fibromax
Fibrabel
Non-structural MDF board for industrial processing and interior applications
• MDF
• CE norm: L.MDF
• Dry conditions – service class 1
• Formaldehyde class: Low
• Density: Standard
High quality MDF board (L-MDF according EN 622-5) with a hard, fine and smoothly sanded surface. Fibrabel can be used for non-load bearing applications in dry conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resource Board (CARB – phase 2) and EPA (TSCA – Title VI). Fibrabel is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management. Fibrabel is an original Spanolux product.
Applications
• Interior and furniture
Available fire reaction classes
• D-s2-d0
Fibrabel
Fibrabel Black
Non-structural MDF board for industrial processing and interior applications, black coloured in core
• MDF
• CE norm: L.MDF
• Dry conditions – service class 1
• Black
• Formaldehyde class: Low
• Density: Standard
High quality MDF board (L-MDF according EN 622-5) with a hard, fine and smoothly sanded surface. The panel is coloured black in the mass. Fibrabel Black can be used for non-load bearing applications in dry conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resources Board (CARB – phase 2) and EPA (TSCA – Title VI). Fibrabel Black is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management. Fibrabel Black is an original Spanolux product.
Applications
• Interior and furniture
Available fire reaction classes
• D-s2-d0
Fibrabel Black
Fibrabel Black LF+
Non-structural MDF board for industrial processing and interior applications, black coloured in core
• MDF
• CE norm: L.MDF
• Dry conditions – service class 1
• Black
• Formaldehyde class: Low
• Density: Standard
High quality MDF board (L-MDF according EN 622-5) with a hard, fine and smoothly sanded surface. The panel is coloured black in the mass. Fibrabel Black LF+ can be used for non-load bearing applications in dry conditions. This board has low formaldehyde emission (E1 class) and complies with the ChemVerbotsV requirements for Germany. Fibrabel Black LF+ also meets the requirements set by the California Air Resources Board (CARB – phase 2) and EPA (TSCA – Title VI). Fibrabel Black LF+ is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management. Fibrabel Black LF+ is an original Spanolux product.
Applications
• Interior and furniture
Available fire reaction classes
• D-s2-d0
Fibrabel Black LF+
Fibrabel Extremelight
Ultra-lightweight non-structural MDF board for industrial processing and interior applications
• MDF
• CE norm: UL1.MDF
• Dry conditions – service class 1
• Formaldehyde class: Standard
• Density: Low
High quality ultra lightweight MDF board (UL1-MDF according EN 622-5) with a hard, fine and smoothly sanded surface. Fibrabel Extremelight can be used for non-load bearing applications in dry conditions. This board has low formaldehyde emission (E1 class). Fibrabel Extremelight is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management. Fibrabel Extremelight is an original Spanolux product.
Fibrabel Extremelight
Fibrabel FR
Fire-retardant and non-structural MDF board for industrial processing and interior applications
• MDF
• CE norm: L.MDF
• Dry conditions – service class 1
• Fire retardant
• Formaldehyde class: Low
• Density: Standard
High quality, fire retardant MDF board (L-MDF FR according EN 622-5) with a hard, fine and smoothly sanded surface. For easy identification, the panel is coloured red in the mass. Fibrabel FR can be used for non-load bearing applications in dry conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resource Board (CARB – phase 2) and EPA (TSCA – Title VI). Fibrabel FR is hardly flammable (European fire reaction classification B), has a significantly delayed combustion and does not contribute to flame spread. For thickness from 10 to 14,9 mm, Fibrabel FR is B-s2-d0 certified (EN 13501-1). For thickness from 15 to 25 mm, Fibrabel FR is B-s1-d0 certified (EN 13501-1). For the thickness range from 10 to 30 mm, Fibrabel FR also meets Class 1/Class A as set by ASTM E84. Fibrabel FR is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management. Fibrabel FR is an original Spanolux product.
Applications
• Interior and furniture
Available fire reaction classes
• B-s1-d0
• B-s2-d0
Fibrabel FR
Fibrabel FR Uncoloured
Fire-retardant and non-structural MDF board for industrial processing and interior applications
• MDF
• CE norm: L.MDF
• Dry conditions – service class 1
• Fire retardant
• Formaldehyde class: Low
• Density: Standard
High quality & fire retardant MDF board (L-MDF FR according EN 622-5) with a hard, fine and smoothly sanded surface. Fibrabel FR Uncoloured can be used for non-load bearing applications in dry conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resource Board (CARB – phase 2) and EPA (TSCA – Title VI). Fibrabel FR Uncoloured is hardly flammable (European fire reaction classification B), has a significantly delayed combustion and does not contribute to flame spread. For thickness from 10 to 14,9 mm, Fibrabel FR Uncoloured is B-s2-d0 certified (EN 13501-1). For thickness from 15 to 25 mm, Fibrabel FR Uncoloured is B-s1-d0 certified (EN 13501-1). For the thickness range from 10 to 30 mm, Fibrabel FR Uncoloured also meets Class 1/Class A as set by ASTM E84. Fibrabel FR Uncoloured is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management. Fibrabel FR Uncoloured is an original Spanolux product.
Applications
• Interior and furniture
Available fire reaction classes
• B-s1-d0
• B-s2-d0
Fibrabel FR Uncoloured
Fibrabel FR Wheelmark
Fire-retardant and non-structural MDF board for industrial processing and interior applications, Wheelmark certified
• MDF
• CE norm: L.MDF
• Dry conditions – service class 1
• Fire retardant
• Formaldehyde class: Low
• Density: Standard
High quality & fire retardant MDF board (L-MDF FR according EN 622-5) with a hard, fine and smoothly sanded surface. For easy identification, the panel is coloured red in the mass. Fibrabel FR Wheelmark can be used for non-load bearing applications in dry conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resource Board (CARB – phase 2) and EPA (TSCA – Title VI). Fibrabel FR Wheelmark is hardly flammable (European fire reaction classification B), has a significantly delayed combustion and does not contribute to flame spread. Fibrabel FR Wheelmark is B-s1-d0 certified (EN 13501-1). For thickness 15 to 25 mm, Fibrabel FR Wheelmark is labelled with the Mark of Conformity(Wheelmark). For the thickness range from 15 to 30 mm, Fibrabel FR Wheelmark also meets Class 1/Class A as set by ASTM E84. Fibrabel FR Wheelmark is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management. Fibrabel FR Wheelmark is an original Spanolux product.
Applications
• Interior and furniture
Available fire reaction classes
• B-s1-d0
Fibrabel FR Wheelmark
Fibrabel LF+
Non-structural MDF board for industrial processing and interior applications
• MDF
• CE norm: L.MDF
• Dry conditions – service class 1
• Formaldehyde class: Low
• Density: Standard
High quality MDF board (L-MDF according EN 622-5) with a hard, fine and smoothly sanded surface. Fibrabel LF+ can be used for non-load bearing applications in dry conditions. This board has low formaldehyde emission (E1 class) and complies with the ChemVerbotsV requirements for Germany. Fibrabel LF+ also meets the requirements set by the California Air Resources Board (CARB – phase 2) and EPA (TSCA – Title VI). Fibrabel LF+ is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management. Fibrabel LF+ is an original Spanolux product.
Applications
• Interior and furniture
Available fire reaction classes
• D-s2-d0
Fibrabel LF+
Fibrabel MR
Moisture-resistant and non-structural MDF board for industrial processing and interior applications
• MDF
• CE norm: L.MDF.H
• Moisture resistant
• Humid conditions – service class 2
• Formaldehyde class: Low
• Density: Standard
High quality & moisture resistant MDF board (L-MDF.H according EN 622-5) with a hard, fine and smoothly sanded surface. For easy identification, the panel is coloured green in the mass. Fibrabel MR can be used for non-load bearing applications in humid conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resource Board (CARB – phase 2) and EPA (TSCA – Title VI). Fibrabel MR is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management. Fibrabel MR is an original Spanolux product.
Applications
• Interior and furniture
Available fire reaction classes
• D-s2-d0
Fibrabel MR
Fibrabel MR FR NAF
Moisture-resistant, fire-retardant, non-structural MDF board with no added formaldehyde for industrial processing and interior applications
• MDF
• CE norm: L.MDF.H
• Moisture resistant
• Humid conditions – service class 2
• Fire retardant
• Formaldehyde class: NAF
• Density: Standard
High quality, moisture resistant & fire retardant MDF board (L-MDF.H FR according EN 622-5), with a hard, fine and smoothly sanded surface. Fibrabel MR FR NAF is characterised by extremely low formaldehyde emissions (no added formaldehyde-based resins). Fibrabel MR FR NAF can be used for non-load bearing applications in humid conditions. This board is approved by the by Air Resources Board (ARB) as a no-added formaldehyde based resin (NAF) MDF board (section 93120.3 of the ATCM Airborne Toxic Control Measure. Fibrabel MR FR NAF is hardly flammable (ASTM E84 Class A/Class 1 rating for thicknesses 12 – 25 mm and European fire reaction classification B), has a significantly delayed combustion and does not contribute to flame spread. For all available thicknesses (from 12 to 25 mm), Fibrabel MR FR NAF is B-s1-d0 certified (EN 13501-1). Fibrabel MR FR NAF is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management. Fibrabel MR FR NAF is an original Spanolux product.
Applications
• Interior and furniture
Available fire reaction classes
• B-s1-d0
Fibrabel MR FR NAF
Fibrabel MR NAF MR50
Moisture-resistant, non-structural MDF board with no added formaldehyde for industrial processing and interior applications
• MDF
• CE norm: L.MDF.H
• Moisture resistant
• Humid conditions – service class 2
• Formaldehyde class: NAF
• Density: Standard
High quality, moisture resistant MDF board (L-MDF.H according EN 622-5) with a hard, fine and smoothly sanded surface. Fibrabel MR NAF MR50 is characterised by extremely low formaldehyde emissions (no added formaldehyde-based resins). Fibrabel MR NAF MR50 can be used for non-load bearing applications in humid conditions. The product meets the criteria required for the MR50 / grade 115 designation (ANSI A208.2-2016). This board is approved by the by Air Resources Board (ARB) as a no-added formaldehyde based resin (NAF) MDF board (section 93120.3 of the ATCM ‘Airborne Toxic Control Measure’). Fibrabel MR NAF MR50 is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management. Fibrabel MR NAF MR50 is an original Spanolux product.
Applications
• Interior and furniture
Available fire reaction classes
• D-s2-d0
Fibrabel MR NAF MR50
Fibrabel MR Uncoloured
Moisture-resistant and non-structural MDF board for industrial processing and interior applications
• MDF
• CE norm: L.MDF.H
• Moisture resistant
• Humid conditions – service class 2
• Formaldehyde class: Low
• Density: Standard
High quality & moisture resistant MDF board (L-MDF.H according EN 622-5) with a hard, fine and smoothly sanded surface. Fibrabel MR Uncoloured can be used for non-load bearing applications in humid conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resource Board (CARB – phase 2) and EPA (TSCA – Title VI). Fibrabel MR Uncoloured is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management. Fibrabel MR Uncoloured is an original Spanolux product.
Applications
• Interior and furniture
Available fire reaction classes
• D-s2-d0
Fibrabel MR Uncoloured
Fibralux FR Wheelmark
Fire retardant and structural MDF board for industrial processing and interior applications, Wheelmark certified
• MDF
• CE norm: MDF.LA
• Dry conditions – service class 1
• Fire retardant
• Formaldehyde class: Low
• Density: High
High density, fire retardant MDF board (MDF.LA FR according EN 622-5) with a hard, fine and smoothly sanded surface. For easy identification, the panel is coloured red in the mass. Fibralux FR Wheelmark can be used for load bearing applications in dry conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resource Board (CARB – phase 2) and EPA (TSCA – Title VI). Fibralux FR Wheelmark is hardly flammable (European fire reaction classification B), has a significantly delayed combustion and does not contribute to flame spread. Fibralux FR Wheelmark is B-s1-d0 certified (EN 13501-1). For the thickness range from 12 to 30 mm, Fibralux FR Wheelmark also meets Class 1/Class A as set by ASTM E84. For thickness 12 to 30 mm, Fibralux FR Wheelmark is labelled with the Mark of Conformity (Wheelmark) Fibralux FR Wheelmark is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management. Fibralux FR Wheelmark is an original Spanolux product.
Applications
• Interior and furniture
Available fire reaction classes
• B-s1-d0
Fibralux FR Wheelmark
Fibralux MR
Moisture-resistant and structural MDF board for industrial processing and interior applications
• MDF
• CE norm: MDF.HLS
• Moisture resistant
• Humid conditions – service class 2
• Formaldehyde class: Low
• Density: High
High density, moisture resistant MDF board (MDF.HLS according EN 622-5) with a hard, fine and smoothly sanded surface. For easy identification, the panel is coloured green in the mass. Fibralux MR can be used for load bearing applications in humid conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resource Board (CARB – phase 2) and EPA (TSCA – Title VI). Fibralux MR is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management. Fibralux MR is an original Spanolux product.
Applications
• Interior and furniture
Available fire reaction classes
• D-s2-d0
Fibralux MR
Fibralux MR Black
Moisture-resistant and structural MDF board for industrial processing and interior applications, black coloured in core
• MDF
• CE norm: MDF.HLS
• Moisture resistant
• Humid conditions – service class 2
• Black
• Formaldehyde class: Low
• Density: High
High density, moisture resistant MDF board (MDF.HLS according EN 622-5) with a hard, fine and smoothly sanded surface. The panel is coloured black in the mass. Fibralux MR Black can be used for load bearing applications in humid conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resource Board (CARB – phase 2) and EPA (TSCA – Title VI). Fibralux MR Black is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management. Fibralux MR Black is an original Spanolux product.
Applications
• Interior and furniture
Available fire reaction classes
• D-s2-d0
Fibralux MR Black
Fibralux MR FR NAF
Moisture-resistant, fire retardant and non-structural MDF board with no added formaldehyde for industrial processing and interior applications
• MDF
• CE norm: MDF.H
• MDF.H FR
• Humid conditions – service class 2
• Fire retardant
• Formaldehyde class: NAF
• Density: High
High density, moisture resistant & fire retardant MDF board (MDF.H FR according EN 622-5), with a hard, fine and smoothly sanded surface. Fibralux MR FR NAF is characterised by extremely low formaldehyde emissions (no added formaldehyde-based resins). Fibralux MR FR NAF can be used for non-load bearing applications in humid conditions. This board is approved by the by Air Resource Board (ARB) as a no-added formaldehyde based resin (NAF) MDF board (section 93120.3 of the ATCM (Airborne Toxic Control Measure). Fibralux MR FR NAF is hardly flammable (ASTM E84 Class A/Class 1 rating for thicknesses 9 – 30 mm and European fire reaction classification B), has a significantly delayed combustion and does not contribute to flame spread. For all available thicknesses (from 6 to 30 mm), Fibralux MR FR NAF is B-s1-d0 certified (EN 13501-1). Fibralux MR FR NAF is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management. Fibralux MR FR NAF is an original Spanolux product.
Applications
• Interior and furniture
Available fire reaction classes
• B-s1-d0
Fibralux MR FR NAF
Fibralux MR Grey
Moisture-resistant and structural MDF board for industrial processing and interior applications, grey coloured in core
• MDF
• CE norm: MDF.HLS
• Moisture resistant
• Humid conditions – service class 2
• Grey
• Formaldehyde class: Low
• Density: High
High density, moisture resistant MDF board (MDF.HLS according EN 622-5) with a hard, fine and smoothly sanded surface. The panel is coloured grey in the mass. Fibralux MR Grey can be used for load bearing applications in humid conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resource Board (CARB – phase 2) and EPA (TSCA – Title VI). Fibralux MR Grey is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management. Fibralux MR Grey is an original Spanolux product.
Applications
• Interior and furniture
Available fire reaction classes
• D-s2-d0
Fibralux MR Grey
Fibralux MR NAF
Moisture-resistant, structural, high-density MDF board with no added formaldehyde for industrial processing and interior applications
• MDF
• CE norm: MDF.HLS
• Moisture resistant
• Humid conditions – service class 2
• Formaldehyde class: NAF
• Density: High
High density, moisture resistant MDF board (MDF.HLS according EN 622-5) with a hard, fine and smoothly sanded surface. Fibralux MR NAF is characterised by extremely low formaldehyde emissions (no added formaldehyde-based resins). Fibralux MR NAF can be used for load bearing applications in humid conditions. This board is approved by the by Air Resources Board (ARB) as a no-added formaldehyde based resin (NAF) MDF board (section 93120.3 of the ATCM ‘Airborne Toxic Control Measure’). Fibralux MR NAF is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management. Fibralux MR NAF is an original Spanolux product.
Applications
• Interior and furniture
Available fire reaction classes
• D-s2-d0
Fibralux MR NAF
Fibralux MR Uncoloured
Moisture-resistant and structural MDF board for industrial processing and interior applications
• MDF
• CE norm: MDF.HLS
• Moisture resistant
• Humid conditions – service class 2
• Formaldehyde class: Low
• Density: High
High density, moisture resistant MDF board (MDF.HLS according EN 622-5) with a hard, fine and smoothly sanded surface. Fibralux MR Uncoloured can be used for load bearing applications in humid conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resource Board (CARB – phase 2) and EPA (TSCA – Title VI). Fibralux MR Uncoloured is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management. Fibralux MR Uncoloured is an original Spanolux product.
Applications
• Interior and furniture
Available fire reaction classes
• D-s2-d0
Fibralux MR Uncoloured
Fibralux NAF
Structural MDF board with no added formaldehyde for industrial processing and interior applications
• MDF
• CE norm: MDF.LA
• Dry conditions – service class 1
• Formaldehyde class: NAF
• Density: High
High density MDF board (MDF.LA according EN 622-5) with a hard, fine and smoothly sanded surface. Fibralux NAF is characterised by extremely low formaldehyde emissions (no added formaldehyde-based resins). Fibralux NAF can be used for load bearing applications in dry conditions. This board is approved by the by Air Resource Board (ARB) as a no-added formaldehyde based resin (NAF) MDF board (section 93120.3 of the ATCM / Airborne Toxic Control Measure). Fibralux NAF is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management. Fibralux NAF is an original Spanolux product.
Applications
• Interior and furniture
Available fire reaction classes
• D-s2-d0
Fibralux NAF
Fibralux Plus
Structural MDF board for industrial processing and interior applications
• MDF
• CE norm: MDF.LA
• Dry conditions – service class 1
• Formaldehyde class: Low
• Density: High
High density MDF board (MDF.LA according EN 622-5) with a hard, fine and smoothly sanded surface. Fibralux Plus can be used for load bearing applications in dry conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resources Board (CARB – phase 2) and EPA (TSCA – Title VI). Fibralux Plus is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management. Fibralux Plus is an original Spanolux product.
Applications
• Interior and furniture
Available fire reaction classes
• D-s2-d0
Fibralux Plus
Fibralux Pro
Non-structural MDF board for industrial processing and interior applications
• MDF
• CE norm: MDF
• Dry conditions – service class 1
• Formaldehyde class: Low
• Density: High
High quality MDF board (MDF according EN 622-5) with a hard, fine and smoothly sanded surface. Fibralux Pro can be used for non-load bearing applications in dry conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resource Board (CARB – phase 2) and EPA (TSCA – Title VI). Fibralux Pro is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management. Fibralux Pro is an original Spanolux product.
Applications
• Interior and furniture
Available fire reaction classes
• D-s2-d0
Fibralux Pro
Fibralux Pro P
Non-structural MDF board for industrial processing and interior applications
• MDF
• CE norm: MDF
• Dry conditions – service class 1
• Formaldehyde class: Low
• Density: High
High quality MDF board (MDF according EN 622-5) with a hard, fine and smoothly sanded surface. Fibralux Pro P can be used for non-load bearing applications in dry conditions. This board has low formaldehyde emission (E1 class) and also meets the requirements set by the California Air Resource Board (CARB – phase 2) and EPA (TSCA – Title VI). Fibralux Pro P Uncoloured is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management. Fibralux Pro P is an original Spanolux product.
Applications
• Interior and furniture
Available fire reaction classes
• D-s2-d0
Fibralux Pro P
Fibrofit
Non-structural MDF board for industrial processing and interior applications
• MDF
• CE norm: L.MDF
• Dry conditions – service class 1
• Formaldehyde class: Standard
• Density: Standard
MDF board (L-MDF according EN 622-5) with a hard, fine and smoothly sanded surface. Fibrofit can be used for non-loading bearing applications in dry conditions. This board has low formaldehyde emission (E1 class). Fibrofit is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management.
Applications
• Interior and furniture
Available fire reaction classes
• D-s2-d0
• E
Fibrofit
Fibrofit MR
Moisture-resistant and non-structural MDF board for industrial processing and interior applications
• MDF
• CE norm: L.MDF.H
• Moisture resistant
• Humid conditions – service class 2
• Formaldehyde class: Standard
• Density: Standard
Moisture resistant MDF board (L-MDF.H according EN 622-5) with a hard, fine and smoothly sanded surface. For easy identification, the panel is coloured green in the mass. Fibrofit MR can be used for non-loading bearing applications in humid conditions. This board has low formaldehyde emission (E1 class). Fibrofit MR is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management.
Applications
• Interior and furniture
Available fire reaction classes
• D-s2-d0
• E
Fibrofit MR
Fibromax Compact MR Black
Compact Density Fibreboard (density > 1.000 kg/m³), black coloured in core, with low swelling & high physical and mechanical properties, for industrial processing and interior applications
• MDF
• CE norm: MDF.H
• Moisture resistant
• Humid conditions – service class 2
• Black
• Formaldehyde class: Standard
Compact density fibreboard, with a density of > 1000 kg/m³ and black core coloured. Fibromax Compact MR Black is a very robust high-quality board, with excellent physical and mechanical properties (very low swelling, high internal bond, strong resistance to impact, …). The board can be machined easily (sawing, drilling & milling) and be finished with melamine, HPL, wood veneer, etc. The board has low formaldehyde emission (E1 class). Fibromax Compact MR Black is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management.
Applications
• Interior and furniture
Available fire reaction classes
• D-s2-d0
• E
Fibromax Compact MR Black
Fibromax MR
Moisture-resistant and non-structural MDF board for industrial processing and interior applications
• MDF
• CE norm: MDF.H
• Moisture resistant
• Humid conditions – service class 2
• Formaldehyde class: Standard
• Density: High
High density, moisture resistant MDF board (MDF.H according EN 622-5) with a hard, fine and smoothly sanded surface. For easy identification, the panel is coloured green in the mass. Fibromax MR can be used for non-loading bearing applications in humid conditions. This board has low formaldehyde emission (E1 class). Fibromax MR is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management.
Applications
• Interior and furniture
Available fire reaction classes
• D-s2-d0
• E
Fibromax MR
Fibromax MR Uncoloured
Moisture-resistant and non-structural MDF board for industrial processing and interior applications
• MDF
• CE norm: MDF.H
• Moisture resistant
• Humid conditions – service class 2
• Formaldehyde class: Standard
• Density: High
High density, moisture resistant MDF board (MDF.H according EN 622-5) with a hard, fine and smoothly sanded surface. Fibromax MR Uncoloured can be used for non-loading bearing applications in humid conditions. This board has low formaldehyde emission (E1 class). Fibromax MR Uncoloured is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management.
Applications
• Interior and furniture
Available fire reaction classes
• D-s2-d0
• E
Fibramax MR Uncoloured
Fibromax Pro
Moisture-resistant and non-structural MDF board for industrial processing and interior applications
• MDF
• CE norm: MDF.H
• Moisture resistant
• Humid conditions – service class 2
• Formaldehyde class: Standard
• Density: High
High density, moisture resistant MDF board (MDF.H according EN 622-5) with a hard, fine and smoothly sanded surface. Fibromax MR Uncoloured can be used for non-loading bearing applications in humid conditions. This board has low formaldehyde emission (E1 class). Fibromax MR Uncoloured is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management.
Applications
• Interior and furniture
Available fire reaction classes
• D-s2-d0
• E
Fibromax Pro
Fibromax Pro FI LF+
Non-structural MDF board for industrial processing and interior applications
• MDF
• CE norm: L.MDF
• Dry conditions – service class 1
• Formaldehyde class: Low
• Density: High
High quality MDF board (L-MDF according EN 622-5) with a hard, fine and smoothly sanded surface. Fibromax Pro FI LF+ can be used for non-loading bearing applications in humid conditions. This board has low formaldehyde emission (E1 class) and complies with the ChemVerbotsV requirements for Germany. Fibromax Pro FI LF+ is made from 100% recovered wood: 100% pre-consumer wood from waste flows from the wood industry or thinned wood from sustainable forestry and verge management.
Applications
• Interior and furniture
Available fire reaction classes
• D-s2-d0
• E
Fibromax Pro FI LF+